Recieve your Free Quote Now    704.333.0601

Maintenance

Become a member and unlock VIP-level benefits

The best way to protect your HVAC investment is to keep it tuned up. Failure to invest in maintenance is the primary reason we’re called for repair work. It also shortens the life of otherwise high-quality heating and air conditioning systems.

To protect your HVAC investment, Charles in Charge offers:

  • Annual HVAC maintenance plans that cover the tune ups your home HVAC system requires.
  • Annual air conditioner tune-up packages to reduce your risk of breakdowns, maintain peak performance and extend the life of your investment
  • Annual furnace, heat pump, duct cleaning and ductless-system tune-ups to improve indoor air quality, reduce your risk of breakdowns, maintain peak performance and extend the life of your investment
  • One-time maintenance services on all makes of air conditioners, furnaces, heat pumps and packaged HVAC systems

Our goal is to keep your HVAC system healthy, and you as well. While we can’t prevent the wear and tear that comes with use, there are many things we can do to delay breakdowns and replacement.

Call us today to discuss how a maintenance package could do to protect your heating and cooling investment.

Maintenance Agreement / Gold package

$259.95 – each additional unit $159.95

Maintenance Agreement Cooling Cycle Check

  • Check refrigerant operating pressures
  • Check voltage and amperage to all motors with meter
  • Check air temperature drop across evaporator coil
  • Check start and run capacitors for proper voltage
  • Check evaporator superheat or sub cooling
  • Lubricate all moving parts (if applicable)
  • Purge/Clean condensate drain line (No warranty)
  • Check, clean or replace standard 1” filter(s)
  • Check pressure switch cut-out settings
  • Check electrical lock out circuits
  • Check and clean contactors
  • Check all wiring and connections
  • Calibrate thermostat
  • Clean out primary and emergency drain pans (No warranty)
  • Turn exposed dampers to cooling position, if marked (No balancing).
  • Check duct work for leaks and mold/mildew like substances.
  • Cleaning of the following components:
    • Condenser Coil.
    • Blower Wheel.
    • Evap. Coil if accessible.

Maintenance Agreement / Silver Package

$189.00

Maintenance Agreement Cooling Cycle Check

  • Check refrigerant operating pressures
  • Check voltage and amperage to all motors with meter
  • Check air temperature drop across evaporator coil
  • Check start and run capacitors for proper voltage
  • Check evaporator superheat or sub cooling
  • Lubricate all moving parts (if applicable)
  • Purge/Clean condensate drain line (No warranty)
  • Check, clean or replace standard 1” filter(s)
  • Check pressure switch cut-out settings
  • Check electrical lock out circuits
  • Check and clean contactors
  • Check all wiring and connections
  • Calibrate thermostat
  • Clean out primary and emergency drain pans (No warranty)
  • Turn exposed dampers to cooling position, if marked (No balancing).
  • Check duct work for leaks and mold/mildew like substances.
  • With cleaning of 1 of 3
    • Condenser Coil.
    • Blower Wheel.
    • Evap. Coil if accessible.

Troubleshoot your HVAC problem with Charles

Don’t spend money on a service call for a simple problem. Charles will walk you through some easy troubleshooting steps.

Start the troubleshooter

Need Heating or A/C help?

We'll get back to you within 10 minutes - 24/7.